YOU MUST USE A COMMERCIAL HEAT PRESS FOR ALL TRANSFERS SOLD IN THIS STORE.
A CRICUT EASY PRESS OR IRON WILL NOT WORK!
**This is a Rhinestone Transfer only **
**This transfer can be pressed on any fabric**
Heat your press to 315-330° F. I've found that 330 is my sweet spot. I press for 30 seconds.
We recommend starting with a lower temp and going to a higher temp if needed. Some presses run hot, some have cold spots. We recommend testing your press in multiple areas with a heat gun and practicing with extra transfers to find your "sweet spot."
Roll your garment with a fabric roller to remove as much lint as possible. Pre-press the shirt or material for 5 seconds before adding the transfer to remove moisture.
Lay the transfer face up with the sticky side on the material. Be EXTREMELY careful with lining up your design as the film is sticky and can cause the rhinestones to move. If the rhinestones move, just lightly place them back into place.
These are very delicate transfers and have to be handled gently.
Place Teflon Sheet on top on Transfers / Garment Press for 30 seconds with medium to heavy pressure.
Peel the film very slowly to ensure no rhinestones move during the process.
Place Teflon Sheet on top of the transfer & press again for an additional 30 seconds just to ensure the transfer adheres properly.
BIOT is not responsible for operator or machine error when applying screen print, DTF, or sublimation transfers. We recommend purchasing extra of each transfer and practicing with your machinery, temperatures, pressure, and times before attempting your final product.
